How to install our pull handles

It’s a small change that’ll make a really big difference. Here’s how easy it is to install our cabinet pull handles yourself.

What you’ll need:

Pencil, drill, and suitable drill bit

Installing New Handles

1. Firstly, decide roughly on the desired position of the handle. Hold the handle in the exact location and use a pencil to mark the entry points for the screw holes.

2. Measure the spacing between the entry points to make sure they’re correct and you’re happy with the positioning.

3. Drill through the entry points.

4. Hold the handle over the newly formed holes and push your screws through the holes. Using your hands at first, tighten in place, and then use a screwdriver to secure the handle firmly.

Replacing your existing handles

1. Measure the distance between the two existing screw holes – check this measurement is the same as the hole centres on the new handle.

2. Remove the old handle by unscrewing the bolts.

3. Hold the handle in place over the holes and push your screws through. Using your hands at first, tighten in place, and then use a screwdriver to secure the handle firmly.

Ready to browse our cabinet hardware? You can shop the complete collection in three finishes here. 

Published on 17th April 2025